The Wood Shop

The idea is simple enough - all you really want is to shed water and hold heat in, right?

When I was designing the shop, I investigated several different methods for constructing a roof.  First was manufactured trusses...  I ruled those out because I knew I wouldn't be able to place them myself.  Another option was to use wood I-beams... This was a really tempting option, and now that I've finished, this is the route I would take today, if I were to do it over again.  Finally, I looked at doing it "old school" - with honest to God 2x10 rafters.

I didn't have any real reason for going that way except so I could say I did... a bit of a romantic notion, I think, of older methods.  I hadn't built anything with rafters for a while and was itching to try out my new Milwaukee circular saw, which I treated myself to as part of my savings for doing all the work myself.  My old saw has been dropped one too many times, and while it still works, it's just a little "shook".

A question on dovetails on WoodCentral led to a discussion of their history, and one of the posters produced a link to a photo of a box with some of (if not the) earliest examples of dovetails on record:

Ancient Roman box, dated from the 2nd or 3rd century, currently located in Limesmuseaum Aalen (German language site) in Baden Württemberg. See the original link (Google translation) to the photo on woodworking.de.

It's a fascinating piece, I think most would agree.  I love this sort of old research...  and there's some real sophistication in the design of this box - though I guess sophistication shouldn't be a surprise when you review artworks of the period.  Helenistic statues display the foremost sophistication, for example...  But I digress

The poster also included an informative link to another German site on Roman woodworking tools I also found very interesting.

This box some fairly sophisticated woodworking - and obviously the dovetails' design is well developed at this point.   It's pretty obvious to me that they've been around for (literally) thousands of years...  Interesting that the idea of craftsmanship hasn't really changed all that much in all this time, isn't it?  There is a legacy to woodworking that goes back hundreds of generations, which is something that is easy to forget in the "we do it so much better now" frame of mind.

 It reminds me of some of the items that have been passed down to me..,.  One of my most treasured came from the old country with my grandparents - it's a traveling/storage box known as a "koffort":

Part VI

With the foundation finally out of the way, it was time for my part to start - framing. I find framing fun, so long as it's not my regular job... and I have done it in the past, so I wasn't too nervous about doing it, except for one thing - the wall framing would be full of angles and small complications that would challenge my abilities... but then again, I like a challenge.

I started by putting together a list of materials I would need, and set out to visit suppliers to get some prices. I'm fortunate to have a large number of building supply outlets all within a close distance to where I live... I didn't get to a fraction of them and I visited two borg stores, a lumberyard associated with a nation-wide chain, 1 local franchise lumberyard (several different locations, but all of them are located within a 100 mile or so radius), and two locally owned lumberyards to get prices. The borg prices were not all that far out of line - but those places simply aren't set up well for putting together large loads and they were the furthest from my house, not to mention the service was basically non-existent from these two places in my experience, so I ruled them out almost immediately.

Part V 

One of my favorite lines in a movie was in one of the Naked Gun movies (with Leslie Nielsen) where Ricardo Montalban was playing the villain.  When asked by Priscilla Presley how he could be so evil his response was something like:

"You forget I spent two years as a building contractor!"

Of course that's in jest (?).  You know - there are, of course, good and bad contractors, and I've dealt with my share of each - and the concrete contractor I used for this project was quite unfortunately of the latter persuasion.  I was really disappointed in his work - and I even gave him a second chance the next year to pour the slab out front of the shop for me - but that's for a later entry...  If you are looking for a general contractor, or even just a "sub" contractor, make sure you check references and investigate your choices with the local builders' association.  Above all - you will need patience and perseverance to be successful.  Don't expect perfection - but be ready to stand your ground when needed - and pick your battles well.  Know what's important, and what's not. At the time, there was a shortage of available contractors for me to hire, and I was not patient... 

Part IV 

All right then! Here it was, around the beginning of April, and I had a plan for the new shop (more or less) in hand. It was time to go ahead with the construction... or so I had thought, anyway.

I got a contractor lined up to do the concrete. I had decided that work was simply too much for me to handle on my own, and that it would probably serve me better to have it done by somebody else. I didn't have the equipment, nor did I have the help (or the back) to put down the concrete by myself. I might have mentioned that North Idaho was undergoing an unprecedented building boom at the time. What that meant for me was a wait for the permit. Permits usually take just a couple weeks. Usually, this might not be an issue, but the concrete guy I had lined up had a very tight schedule. Well, it turned out I had a couple of issues that permitting wouldn't allow, mainly the bathroom I had discussed previously. With that, I took the plan home and removed it entirely from the design (which actually helped me out budget-wise), but as it would have it I couldn't take the time off of work to get back to the permit office for two week. When I did finally, it was two more weeks before I got the plan reviewed and approved. I called the concrete guy up, and turns out I was past his window of availability. I would have to find another.